Glitch:iPhone stuck on Apple logo

If your update went wrong then you may well find that your iPhone is stuck on a blank boot screen or on the Apple logo and it won’t start up properly. You’re going to want to connect to iTunes and try DFU (Device Firmware Upgrade) mode.

Potential solution:

1. Hold down the Sleep/Wake button to turn your iPhone off.
2. Open iTunes on your computer and connect your iPhone.
3. Hold down the Sleep/Wake button and the Home button together for ten seconds, and then release the Sleep/Wake button.
4. Continue to hold down the Home button until you see a pop-up on iTunes stating that “iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes.”
5. Your iPhone screen should be blank, if you see a logo or message on it then you are not in DFU mode.
6. Select your iPhone in the left hand column of iTunes and select Summary then Restore.
7. You may need to install the iOS 7 update again.

I don't take responsibility if anything goes wrong

How to FIX : Can't make or receive calls on IPhone

If you’ve run into problems with making or receiving calls after updating to iOS 7 then you are not alone. You might find that people are trying to call you, but your iPhone is not ringing, or perhaps you are unable to make a call. Some people report calls apparently connecting, but the line seems to be dead and they can’t hear the other person. Assuming you’re not just in a dead spot (try making the call from another location), there are a few things you can try.

Potential solutions:

• Go to Settings and toggle Airplane Mode on for five seconds and then turn it off again.
• Make sure that Do Not Disturb in Settings is not turned on.
• Go to Settings > Phone and make sure Call Forwarding is not turned on.
• Go to Settings > Phone and check under Blocked.
• Make sure you have the latest carrier update by going to Settings > General > About. If there’s something available then you should be prompted to download it (make sure you’re connected the Wi-Fi and your mobile network).
• Make sure there isn’t another iOS update by going to Settings > General > Software Update.
• Try removing the SIM card, make sure it’s clean and replace it carefully.
• Try resetting your network settings via Settings > General > Reset > Reset Network Settings.
• Go to Settings > Cellular and try toggling Enable LTE and/or Enable 3G.
• Contact your carrier and make sure there’s no problem on network

If everything fails try to Factory reset

I don't take responsibility if anything goes wrong during the process!(chill it won't )

How to fix IPhone's white screen of death!

Every new operating system has its issues and Apple’s iOS 7 is certainly 

Every  new operating system has its issues and Apple’s iOS 7 is certainly no exception. We’ve seen a multitude of bug reports rolling in and, while many people have updated successfully, there’s no shortage of people encountering glitches or even major problems.  now it’s time to review some common iOS 7 problems and, where possible, identify solutions. We’ll refer to the iPhone throughout the article, but the majority of the problems and fixes will apply to the iPad and iPod Touch as well.

A bug that seems to have cropped up for a lot of people, particularly on the iPad, but also various iPhone models is a random crash from the home screen which soft reboots the device and brings up a screen with the Apple logo. The background color matches the device, so a white iPhone will have a white boot up screen with a black Apple and vice versa. There’s some suggestion that this is linked to the battery, but it’s not clear.

Workarounds:

• Press and hold the Home button and the Sleep/Wake button until you see the Apple logo to restart your device.
• Try DFU mode, explained below under the Glitch: Stuck on Apple logo.
• Backup and factory reset your iPhone.

Potential solution:

• Apple has acknowledged this issue, Apple spokesperson Trudy Muller told Mashable “We have a fix in an upcoming software update for a bug that can occasionally cause a home 

Inputs from digital trends

Google releasing Android based SDK for Wearable Technology,Smartwatches

Google has plans to release a SDK that will help developers and manufacturers put Android on smartwatches and other wearables,Sundar Pichai, Google SVP of Android and Chrome, announced at SXSW in Austin, TX on Sunday.

Pichai said the software framework is a "vision for developers of how we see this market working” and reiterates the rumours Google has been eyeing the wearables market. The wearables SDK will presumably be made for lower-grade hardware and tap into sensors found on smartwatches.

Up until now, smartwatch developers have had to rely on forking and heavily modifying Android code intended for smartphones and tablets. As we saw with the original Galaxy Gear released in September 2013, this can be a hard thing to do, and maybe ultimately why Samsung chose Tizen for its second version.

Google didn't name potential partners to use the Android wearables SDK, but given the nature of Android, it will be available for everyone. If rumours are to be believed, Google has teamed up with LG for a smartwatch launch in June. Of course, Pichai remained quiet on any broader plans.

Wearables have become a fascination of the industry, with Pebble kicking things off in 2013, followed bySamsung and Sony making bigger plays as the smartphone market begins to slow down. HTC and Apple have also been tipped to have a wearable smartwatch in the works.

It will be interesting to see what companies can do with the new software.

How to use Emoji's on IPhone and IPad

1 / 4

Ever get an iMessage on your iPhone from someone you know that contains smiley or frowny faces, or even pictures of animals or cars, flowers or dancers, space ships or iPhones, and wonder how they did it? In the old days it was emoticons. Now it's emoji. EveryiPhone and iPad has the ability to send and receive them. All you have to do is turn them on!

• How to enable emoji on your iPhone oriPad
• How to use emoji on your iPhone oriPad

How to enable emoji on iPhone and iPad

Launch the Settings app on your iPhone or iPad.

Tap on General.

Scroll down and tap on Keyboard.

On the next screen tap on Keyboards.

Choose Add New Keyboard...

All the keyboards are in alphabetical order. Scroll down to E and tap on Emoji.

How to access and use emoji on iPhone and iPad

Launch any app that uses the keyboard. In this example, I'm going to use the Messages app.

Go to compose a message or type in any field as you normally would.

When the keyboard pops up, tap on the Globe key which is to the right of the number toggle in the lower left hand corner.

You can now explore all the different sections and choose the emoji you'd like to send. Once you're done picking your emoji, just tap the Globe key again to get back to the regular keyboard.

That's all there is to it! Emoji will work in any app that supports keyboard input. Just keep in mind that for the most part, only people using iPhones, iPads, or Macs can see your emoji.

Inputs from -IMore

Jailbreak IOS 7 Untethered!

This is just in. Team Evad3rs has just released untethered Evasi0n iOS 7 – 7.0.4 jailbreak for 

Available for both Windows and Mac users, Evasi0n iOS 7 jailbreak works on all iPhone, iPad and iPod touch models running iOS 7.0, 7.0.1, 7.0.2, 7.0.3 and 7.0.4.

This includes:

• iPhone 5s
• iPhone 5c
• iPhone 5
• iPhone 4S
• iPhone 4
• iPad 2
• iPad 3
• iPad 4
• iPad Air
• iPad mini
• iPad mini 2
• iPod touch 5

We will be back with full how-to tutorials. Those of you who want to jailbreak right away can do so by downloading Evasi0n from official website at Evasi0n.com or through the links given below.

Download Evasi0n for Windows 
Download Evasi0n for Mac

Update x1: This release has also caught Saurik, the founder of Cydia, by surprise. He has clarified it on Twitter that the Cydia build included in version 1.0 of Evasi0n 7 isn’t official, and hence will be prone to bugs. Tweaks relying on Substrate will have issues with this early release of Evasi0n. This issue will be fixed in later versions of Evasi0n 7.

Update x2: Evasi0n 7 is also compatible to work with iOS 7.1 beta 2.

Update x3: Our full step by step video tutorial is up and embedded below! For full written instructions, check out: Jailbreak iOS 7 – 7.0.4 Untethered On iPhone 5s, 5c, 5, 4s And More With Evasi0n 7 [Video Tutorial]

Update x4: Make sure you check out: List of iOS 7 Compatible Jailbreak Tweaks And Apps In Cydia.

Update x5: Evasi0n has been updated to version 1.0.1, removing the TaiG App Store completely. The download links above have been updated.

Update x6: Evasi0n 7.x Untether 0.2 update now available on Cydia, bringing Evasi0n 1.0.1 features to Evasi0n 1.0 users.

Update x7: Download links for Evasi0n embedded above have been updated to the latest version 1.0.2. This version adds fix for iPad 2 stuck at boot loop issue.

Update x8: Apple released iOS 7.1 beta 3 recently. Fortunately, the exploits used in Evasi0n7 still work on the latest beta of iOS 7.1. An unofficial version of Evasi0n7 is now available that lets youjailbreak iOS 7.1 beta 3 untethered on all the devices.

Update x9: Evasi0n 1.0.4 is out with important security patches related to untether, as well as a fix for reboot loop issue on Retina iPad mini. The download links of Evasi0n above have been updated.

Update x10: New version 1.0.5 of Evasi0n is out. Adds support for the latest iOS 7.0.5 firmware which Apple released recently for iPhone 5s and iPhone 5c. Download links for Evasi0n jailbreaktool have been updated.

Update x11: Evasi0n7 1.0.6 is out to jailbreak iOS 7.0.6 untethered. You can download iOS 7.0.6from here, and then jailbreak iOS 7.0.6 with our guide. Download links for Evasi0n given above have been updated with latest version.

Inputs from -Redmond Pie